1. Install the network cabinet and equipment
   • Assemble the cabinet – follow the instruction sheet provided with the network cabinet
     • Look at these pictures of the vertical mounting support brackets
   • Install the network devices in the cabinet
   • Wire the devices
   • Networking gotchas
2. General installation guidance
3. Install the pay station base
   • Model EP13 – base install
   • Models EP21, O, S2 – base install
4. Install the pay station top hat
   • Model EP13 – top hat install
   • Model EP21
   • Model O
   • Model S2
5. In-Bay Automatic (IBA) – Install the I/O interface (a.k.a. Sealevel)
   • Determine voltage requirements – print this form <click here> and fill it out for each bay. You must provide this completed form to Dencar for support during turn-up.
   • Wire the Sea Level I/O interface to the car wash equipment
     • Quick reference guides (by wash equipment type)
   • Configure the Sea Level I/O interface via the Dencar Control Console & Customer Management Portal
6. Follow these testing procedures